Application System
A New High-Performance Operating System
MAPPS III for Machining Center
Graphics performance has been dramatically improved, the system features intuitive operation, and both setup time and programming time have been shortened. MAPPS III is characterized by unsparing use of state-of-the-art technology, has been developed with a constant focus on the operator's perspective, and is an NC unit that Mori Seiki takes pride in throughout the world.
Main Features
- • Advanced hardware
- A high-performance system that is very reliable even in punishing environments, a memory area that can store large volumes of data, and fast processing capability that frees the operator from stress....
MAPPS III incorporates the high specification hardware that you might expect of a third generation NC unit. - • Exceptional operating convenience
- With features like a high-visibility display, an easy-to-use keyboard, and a pointing device that shows its real worth in 3D cutting simulations, this is a userfriendly interface that has been thoroughly thought out from the operator's point of view.
- • Faster creation of programs
- Enhancing the various programming functions has made it possible to cut overall program creation time by over 30%.
- • Faster setup
- These functions reduce the time needed for preparations as well as help prevent mistakes during setup.
- • Minimizing machine down time
- The ability to manage regular maintenance and inspection from the operation panel means less machine down time.
Functions
3D cutting simulation
It makes checking machining shapes and tool paths simple.
Drawing simulation time comparison
MAPPS III's drawing simulation processing speed is much faster than MAPPS II's - about a 80% time reduction for a workpiece requiring 47 processes.
- • Simulations of manually created G code programs, and not just programs entered using the conversational function, are also possible (including sub-programs)
- • Zooming and rotation are available during simulations and tool trajectories can be displayed
Conversational direct operation function and conversational direct drawing function
Conversational data entered based on the drawings can be used to perform a drawing check (direct drawing) and to carry out direct operation, all without creating an NC program. After entry of the conversational data, the data can immediately be used for operation, reducing the setup time.
- Advantages
- • Does not require NC memory (program storage capacity)
- • Because NC text conversion is not required, this function is ideal for single workpieces where shorter setup times are particularly important
3D interference checking function (NMV Series)
In machining with a 5-axis machine, even a small error in operation can lead to a collision accident in the machine.
You can check for interference in 3D for spindles, tables, tools, workpieces and fixtures.
Since the machine will stop when interference is detected either in manual or in automatic mode, we have achieved the world's safest system against interference.
*The 3D interference checking function will check for interference accurately as long as the 3D model exactly matches the actual configuration of the spindles, tables, tools, workpieces and fixtures. *Customized design is required for special shape. *A cutting simulation that shows how material is removed as machining proceeds cannot be carried out during a 3D interference check.
Interference check function
Since it checks for interference in both automatic and manual modes, you will have peace of mind from setup right through to program operation.
High-speed canned cycles (Option MSX-500 Series, MSX-700 Series)
The screen guidance helps the operator enter arguments for canned cycles.
A single-line program can suffice to provide instructions for high-speed cutting.
High-speed machining for shorter machining times
- • In addition to the functions from the SEICOS SHG1 control, a new cycle has been added that simplifies the complex programming required for high-speed machining
Shorter programming time
- • Automatic generation of the optimal tool paths for high-speed machining
- • Support for troublesome program formats
- • Menu-driven operation that does not require a manual
High speed side milling cycle
High feedrate cutting with small side load and deep depth
Z Feeding groove cycle
10 times faster than regular cutting condition
Square pocket cycle
End mill efficiently machines square pocket shapes or track shapes
Corner pocket cycle
High speed corner cutting after square pocket cycle
Trochoid cycl
Machining a groove, circular groove, wide width groove, with an end mill moving in a circular motion
Helical hole cycle
Can make a tapered hole even threading
MAPPS tool management system (MSX-500 Series, MSX-700 Series)
Information on various tools can be managed comprehensively, to support efficient programming and machining plans.
By combining with other application systems, it also allows more effective tool management, both for stand-alone machines and systems.
Tool data list
It displays a list of the data for the tools mounted in the magazine. Offset values, tool life values etc can be checked on a single screen.
Tool data details
Detailed data about the spindle speed, feedrate etc for each tool can be entered and displayed.
The Tool Management System
MCC-TMS
MCC-TMS is compatible with tool ID systems which use IC chips.
It can also be connected to a Linear Pallet Pool system.
Tools can be centrally managed from a PC, which prevents interruptions to machining caused by missing or worn out tools, and supports continuous, long-term system operation. (Option)
Network
An Internet Machine Monitoring Service
MORI-NET Grobal Edition
Mori Seiki's MORI-NET Global Edition is a support service using communication terminals and the Internet.
The Mori Seiki can keep an eye on all your machines, simply by connecting your machines to our network.
System for Data Management
MORI-SERVER
- • Fill requests from multiple Mori Seiki machines simultaneously from a central server connected over an Ethernet network.
- • NC data is stored as files on your PCs hard drive, allowing daily backup of machine data.
* If you are using NC units other than MAPPS, please contact your Mori Seiki representative.