Horizontal Machining Center
High-Precision Horizontal Machining Center NH SERIES
Raising production efficiency to their maximum.
The NH Series achieves the ultimate in production efficiency for extended operation. High speed, high precision, chip disposal, maintenance and other performance features demanded of horizontal machining centers are achieved in this machine at a very advanced level.
Main Features
DCG® (Driven at the Center of Gravity) minimizes vibration, thereby delivering high quality machining, fast speeds, and long tool lives.
Since we have designed the maximum tool length to be the same size as the pallet, deep hole boring up to the length of the pallet can be done without turning the table around.
By using the Box-in-Box Construction for the linear axes, and DDM™ as an option for direct drive on the rotary axes, the NH Series has increased the drive speed on all axes.
Lineup
NH SERIES
| NH10000 DCG | |
|---|---|
| X-axis travel <longitudinal movement of saddle> mm (in.) |
1,700 (66.9) |
| Y-axis travel <vertical movement of spindle head> mm (in.) |
1,400 (55.1) |
| Z-axis travel <cross movement of pallet> mm (in.) |
1,510 (59.4) |
| Pallet working surface mm (in.) |
1,000 x 1,000 (39.3 x 39.3) |
| Pallet loading capacity kg (lb.) |
3,000 (6,600) ［5,000 (11,000)］ |
| Max. workpiece swing diameter mm (in.) |
φ 2,000 (φ78.7) |
| Max. workpiece height mm (in.) |
1,600 (62.9) |
| Max. spindle speed （min-1) |
10,000 ［15,000］［6,000］ |
| Type of tool shank | BT50 [DIN50] [CAT50] [HSK-A100] |
| Tool storage capacity | Chain-type:
60［80］［100］［120］ Rack-type: ［180］［240］［300］ |
| NH4000 DCG | NH5000 DCG/40 | NH5000 DCG/50 | NH6300 DCGII | NH8000 DCGII | |
|---|---|---|---|---|---|
| Variation | 40 |
50 |
|||
| X-axis travel <longitudinal movement of saddle> mm (in.) |
560 (22.0) | 730 (28.7) | 1,050 (41.3) | 1,400 (55.1) | |
| Y-axis travel <vertical movement of spindle head> mm (in.) |
560 (22.0) | 730 (28.7) | 900 (35.4) | 1,200 (47.2) | |
| Z-axis travel <cross movement of pallet> mm (in.) |
630 (24.8) | 850 (33.5) | 980 (38.6) | 1,350 (53.1) | |
| Pallet working surface mm (in.) |
400 x 400 (15.7 x 15.7) |
500 x 500 (19.7 x 19.7) |
630 x 630 (24.8 x 24.8) |
800 x 800 (31.5 x 31.5) |
|
| Pallet loading capacity kg (lb.) |
400 (880) [ 300 (660) <3-station turn-type APC specifications> ] |
500 (1,100) [ 700 (1,540) ] [ 400 (880) <3-station turn-type APC> ] [ 500 (1,100) <3-station turn-type APC> ] |
1,500 (3,300) | 2,200 (4,840) [3,000 (6,600)] |
|
| Max. workpiece swing diameter mm (in.) |
φ630 (24.8) [ 560 (22.0) <3-station turn-type APC specifications> ] |
φ800 (31.4) [ 700 (27.5) <3-station turn-type APC> ] |
φ1,050 (41.3) | φ1,450 (57.0) | |
| Max. workpiece height mm (in.) |
900 (35.4) [800 (31.5) <3-station turn-type APC specifications>] |
1,000 (39.3) [900 (35.4) <3-station turn-type APC>] |
1,300 (51.1) | 1,450 (57.0) | |
| Max. spindle speed （min-1) |
14,000 [14,000] [20,000] |
14,000 [ 20,000 ] |
8,000 [ 15,000 ] |
10,000 [ 8,000 ][ 15,000 ] |
|
| Type of tool shank | BT40 [ DIN40 ] [ CAT40 ] [ HSK-A63 ] |
BT40 [ CAT40 ] [ DIN40 ] [ HSK-A63 ] |
BT50 [ CAT50 ] [ DIN50 ] [ HSK-A100 ] |
BT50 [DIN50] [CAT50] [HSK-A100] |
|
| Tool storage capacity | Chain-type: 40[ 60 ][ 120 ] Rack-type: [ 180 ][ 240 ][ 300 ] |
Chain-type: 40[ 60 ][ 120 ] Rack-type: [ 180 ][ 240 ][ 300 ] [ 360 <Please contact Mori Seiki> ] |
Chain-type: 54 Rack-type: [ 100 ][ 140 ][ 180 ][ 240 ] [ 330 <Please contact Mori Seiki> ] |
Chain-type: 60[ 80 ][ 100 ][ 120 ] Rack-type: [ 180 ][ 240 ][ 330 ] |
|
[ ] Option
Max. spindle speed: Depending on restrictions imposed by the workpiece clamping device,
fixture and tool used, it may not be possible to run at the maximum spindle speed.
No. 40 taper
No. 50 taper