Vertical Machining Center
Vertical Machining Center VS SERIES
•With a high-rigidity, bridge-type structure suitable for machining large workpieces.
•Faster spindles and feeds reduces both cutting and non-cutting times.
- •Shorter setup
- •Medium/Large workpieces
Lineup
VS SERIES
| VS8000/40/1600 | VS8000/50/1600 | VS10000/40/2050 | VS10000/50/2050 | VS10000/40/3150 | VS10000/50/3150 | |
|---|---|---|---|---|---|---|
| Variation | 40 |
50 |
40 |
50 |
40 |
50 |
| X-axis <longitudinal movement of table> mm (in.) |
1,600 (63.0) | 2,050 (80.7) | 3,150 (124.0) | |||
| Y-axis <cross movement of saddle> mm (in.) |
860 (33.9) | 1,000 (39.4) | ||||
| Z-axis travel <vertical movement of spindle head> mm (in.) |
600 (23.6) | |||||
| Working surface mm (in.) |
2,000 x 850 (78.7 x 33.5) | 2,250 x 1,000 (88.6 x 39.4) | 3,350 x 1,000 (131.9 x 39.4) | |||
| Table loading capacity kg (lb.) |
2,000 (4,400) | 3,000 (6,600) | ||||
| Max. spindle speed (min-1) |
12,000[20,000] | 8,000[15,000] | 12,000[20,000] | 8,000[15,000] | 12,000[20,000] | 8,000[15,000] |
| Type of tool shank | BT40 HSK-A63 ［DIN40］［CAT40］ |
BT50 ［DIN50］［CAT50］ |
BT40 HSK-A63 ［DIN40］［CAT40］ |
BT50 ［DIN50］［CAT50］ |
BT40 HSK-A63 ［DIN40］［CAT40］ |
BT50 ［DIN50］［CAT50］ |
| Tool storage capacity | 20[30][40][60][90] | |||||
[ ] Option
Max. spindle speed: Depending on restrictions imposed by the workpiece clamping device,
fixture and tool used, it may not be possible to run at the maximum spindle speed.
No. 40 taper
No. 50 taper